AMAZONEN-Werke EK-S 150, Руководство по эксплуатации

Страница: 13 / 76

General safety advice
EK-S/EK-SH BAG0022.4 07.22
13
2.7 Safety measures and normal operation
Operate the machine only with all safety devices and guards properly
functioning.
Check the machine at least once a day for externally recognisable
damage and for function of the safety devices and guards.
2.8 Danger from residual power
Observe the incidence of mechanic, hydraulic, pneumatic, and elec-
tric/electronic residual power on the machine.
Undertake appropriate measures when instructing the operating staff.
Detailed hints are again given in the relevant chapters of this instruc-
tion manual.
2.9 Maintenance and repair, remedy of faults
Carry out all prescribed setting-, maintenance and servicing work in
due time.
Secure all operating systems like compressed air and hydraulics
against unintended starting.
When exchanging larger components carefully affix them to the hoist-
ing implement.
Check slackened screw joints for firm seating. After having finished
maintenance work, carefully check all safety devices for proper func-
tion.
2.10 Constructional changes
Never carry out any alterations or fittings or changes on the machine
without approval of the AMAZONEN-WERKE This also applies for
welding work on bearing parts.
All fitting or alteration measures require the written approval of AMA-
ZONEN-WERKE. Only use the conversion and optional parts ap-
proved by Messrs AMAZONEN-WERKEN so that the operating permit
remains valid according to national and international regulations.
Vehicles with an official licence or implements and equipment con-
nected with a vehicle with an official licence or permit for road traffic
should be maintained in the appropriate condition.