Amazone ZG-TS 10001Truck Скачать руководство пользователя страница 79

Страница: 79 / 94

Cleaning, maintenance and repairs

ZG-TS BAG0203.2 06.19

10.1

Cleaning

•

Monitor brake, air and hydraulic hose lines particularly carefully.

•

Never treat brake, air and hydraulic hose lines with benzene,
benzole, petroleum or mineral oils.

•

After cleaning, grease the machine, in particular after cleaning
with a pressure washer / steam jet or liposoluble agents.

•

Observe the statutory requirement for the handling and removal
of cleaning agents.

Cleaning with a pressure washer / steam jet

•

Always observe the following points when using a pressure
washer / steam jet for cleaning:

Do not clean any electrical components.

Do not clean any chromed components.

Never aim the cleaning jet from the nozzle of the pressure
washer / steam jet directly on lubrication and bearing
points.

Always maintain a minimum jet distance of 300 mm be-
tween the high pressure cleaning or steam jet cleaning
nozzle and the machine.

Comply with safety regulations when working with pressure
washers.

•

Clean machine with regular water jet (oiled implements only at
washbays with oil separators).

•

Give particular attention to cleaning discharge openings and
sliders.

•

Remove fertiliser deposits from the spreading discs and the
spreading vanes.

•

Before cleaning, open the drainage flap of the hopper using the
hand lever. Close it again after cleaning.

•

When the machine is dry, apply a coat of anti-rust compound.
(Use only biodegradable compounds).

•

Park the machine with the slide gates

opened

•

Clean the spreading discs very carefully and protect from corro-
sion.

Stainless steel components can also corrode when they come

into contact with the spreading material, however, this does not
affect their function.

Faulty fertilising due to soiled radar sensors of the Argus system!

Strong or uneven dirt accumulations can prevent Argus from

properly regulating the delivery system, and the crops are then
over- or under-fertilised in strips.

•

Depending on the operating conditions, check the radar sensors
regularly for strong or uneven dirt accumulations.

•

Clean the radar sensors if necessary.

Содержание ZG-TS 10001Truck































































































Результаты поиска

Содержание ZG-TS 10001Truck

Отзывы:

Бренды по названию

Популярные бренды

Amazone ZG-TS 10001Truck, Руководство по эксплуатации

Результаты поиска

Содержание ZG-TS 10001Truck

Отзывы:

Бренды по названию

Популярные бренды