Mounting on a carrier vehicle
ZG-TS BAG0203.2 06.19
27
1. Lifting of the hopper using 4 attachment points.
2. Dismount the drawbar, jack and running gear (1, 2, 3).
→
To do so, support the ZG on adequately dimensioned head-
stocks.
3. Mount the ZG Truck on the vehicle.
4. Couple the supply lines with the vehicle.
ο
Control terminal to the on-board computer
ο
Couple the hydraulic hoses
ο
Power supply via 7-pin socket
5. Install the control terminal in the driver cab and connect with the
implement plug.
Observe that the maximum load capacity of the frame is 12000 kg!
•
To mount the ZG Truck on the carrier vehicle, use the mounting
plates under the frame and the mounting straps at the front on
the frame.
•
The bottom side of the frame must be slanted down by 5° to the
front so that the spreader unit is aligned properly.
•
Use adequately dimensioned connecting elements when mount-
ing the ZG Truck on the carrier vehicle.
ο
Mounting plate bolted connection: At least 4x M 24 bolts
respectively with a bolt strength of 10.9.
ο
Mounting straps: Pin diameter of 40 mm.
•
Observe the permissible spreading disc height.
•
Ensure that there is enough space for the folding ladder and
access to the hydraulic block at the front of the ZG-WAB.
