Use of the machine
ZG-TS BAG0203.2 06.19
73
8.3
Notes for spreading slug pellets (e.g. Mesurol)
Die Maschine
i
st nach der speziellen Streumengenkontrolle für die
Ausbringung von Schneckenkorn geeignet.
Pay attention to the following particularities for application of slug
pellets.
•
Select fine special spreading material on the control terminal.
•
Spreading of slug pellets must be executed at constant forward
speed because speed-proportional quantity regulation is not ac-
tive.
•
Calibration of slug pellets is executed on the left hopper tip with
the calibration chute.
•
Automatic refilling of the pre-chamber using the floor belt is not
active.
→
Pay attention to the emptying of the pre-chamber and run
the floor belt manually through the control terminal, if nec-
essary
.
Before spreading fine special spreading material, check the scraper
position on the floor belt so that no spreading material can escape
through the crack.
CAUTION
When filling the spreader, avoid inhaling product dust and direct
skin contact (wear protective gloves). After use, thoroughly
clean hands and all affected parts of the skin with water and
soap.
DANGER
Slug pellets in some cases can be very dangerous for children
and pets. Store in a place that is inaccessible to children and
pets. Always comply with the instructions for use provided by
the agent manufacturer!
Concerning the handling of slug pellets, in all other aspects we refer
you to the instructions provided by the manufacturer of the agent and
to the general precautionary measures for handling agricultural pesti-
cides.
•
When spreading slug pellets, ensure that the outlet openings are
always covered with the spreading material, and that the imple-
ment runs at constant spreading disc speed. A residual quantity
of ubstan. 0.7 kg per hopper tip cannot be properly applied. To
empty the spreader, open the shutters and collect the spreading
material that trickles out (e.g. on a tarpaulin).
•
Slug pellets must
not
be mixed with fertiliser or other
ubstancees in order to work with the spreader in a different ad-
justment range.
