Use of the machine
72
ZG-TS BAG0203.2 06.19
To ensure low-vibration running of the spreading discs, balancing
weights are installed on the spreading disc. A certain degree of vibra-
tions caused by the manufacturing tolerances and resonances cannot
be avoided. The spreading discs are balanced at the centre position
(Position 2) of the telescope for the boundary spreading vanes. In
Positions 1 and 3 of the respective telescopes, there may be vibra-
tions caused by technical reasons!
The vibrations do not affect the service life of the implement.
Check for the presence of balancing weights when using spreading
disc TS 3 with telescope D, see page 82.
•
After long transport with a full hopper, ensure that the yield is
correct before spreading begins.
•
The service life of the spreading vanes depends on the kinds of
fertiliser used, the operating times and the spread rates.
