Commissioning
64
ZG-TS BAG0203.2 06.19
6.6.2
Adapting the settings for boundary spreading
To optimise the boundary spreading pattern, the settings can be
adapted in deviation from the setting chart.
To adapt the settings you must proceed in the following sequence.
Always make only one change at a time.
Elongation of the spreading
range toward the boundary
(more fertiliser to the outside)
Delimitation of the spreading
range toward the field
(less fertiliser to the outside).
1.
Telescope of the boundary
spreading vane to a larger ad-
justment value.
Telescope of the boundary
spreading vane to a smaller ad-
justment value.
Telescope is already set to the
maximum value:
2.
Replace telescope of the bounda-
ry spreading vane.
A
→
A+
→
B
→
C
→
D
Replace telescope of the bounda-
ry spreading vane.
D
→
C
→
B
→
A+
→
A
3.
Increase spreading disc speed.
Reduce spreading disc speed.
For extremely large working
widths:
4.
X
Do not switch on Auto TS /
ClickTS for boundary spreading.
