Use of the machine
98
ZG-
B
BAG0051.5 02.14
10.4
Boundary, ditch and side spreading
Boundary and side spreading with the
ZG-B Ultra Hydro
are
carried out by reducing the border-side spreading disc speed.
See the software AMABUS operating manual.
Enter the spreading disc speed for boundary, ditch and side
spreading in the
AMATRON 3
Machine data menu.
See
the
ZG-B
Ultra Hydro
setting chart.
Activate the spreading operating mode in the Work menu by
pressing the relevant button.
Boundary and ditch spreading:
To prevent over-fertilising in the inside of the field, the spread rate at
the boundary must be reduced. There is a slight under-fertilising in
front of the field boundary.
The spread rate is automatically reduced.
Set the quantity reduction as a percentage in the
AMATRON 3
Machine data menu, in accordance with the setting chart.
See
the
ZG-B
Ultra Hydro
setting chart.
Boundary spreading in line with the fertiliser
ordinance
(Fig. 65)
Along the field boundary there is a road, a field
path or another person's lot.
Fertiliser is not permitted to fall beyond the
boundaries in accordance with the fertiliser ordi-
nance.
Ditch spreading in line with the fertiliser ordi-
nance
(Fig. 66)
There is body of water or a ditch along the field
boundary.
The fertiliser ordinance specifies the following:
No fertiliser is permitted to fall across the
border.
(with use of boundary spreading devices).
No
fertiliser
must
be spread within three
metres of the boundary
(without use of boundary spreading de-
vices).
Erosion and wash-away (e.g. in surface
waters) must be prevented.
Fig. 65
Fig. 66
