Structure and function
ZG-B
BAG0051.5 02.14
55
5.11 Spreading
discs
OM
When using OM spreading discs,
(Fig. 27/1) the working width can be infinitely
adjusted by swivelling the spreading vanes on
the discs.
OM
15-24
spreading discs can be used for
working widths of 15-24 m.
OM
24-48
spreading discs can be used for
working widths of 24-48 m.
Fig. 27
As seen in the direction of travel:
Left spreading disc (Fig. 28/1) with
L
mark.
Right spreading disc (Fig. 28/2) with
R
mark.
Spreading vane:
Long
(Fig. 28/3) -
Adjustment scale with values from 35 to 55.
Short
(Fig. 28/4) -
Adjustment scale with values from 5 to 28.
Fig. 28
The U-shaped spreading vanes are installed in such a way that the
open sides point in the direction of rotation and take in the fertiliser.
Configure the settings using the information in the setting chart. You
can easily check the configured working width using the mobile fertil-
iser test rig (optional).
Hydraulic spreading-disc drive
Two hydraulic motors (Fig. 29/1) are used to
drive the spreading discs at the speed entered
on the
AMATRON 3
.
Unless specified otherwise in the setting chart,
the standard speed is 720 rpm.
Fig. 29
