Adjustments
86
ZG-
B
BAG0051.5 02.14
8.3.1
Replacing the spreading discs
1. Remove thumb screw (Fig. 59/1).
2. Rotate the spreading disc so that the 8 mm
dia. disc hole (Fig. 59) is aligned with the
centre of the machine.
3. Remove the spreading disc from the gear-
box shaft.
4. Fit another spreading disc.
5. Secure the spreading disc by tightening the
thumb screw.
When fitting the spreading discs,
do not confuse "left" and "right".
Right spreading disc with
engraved
R
Left spreading disc with en-
graved
L
Fig. 59
