General safety instructions
•
After removing the PTO shaft, attach the protective sleeve to the
universal joint shaft stub.
•
When using the travel-dependent universal joint shaft, note that
the universal joint shaft speed depends on the drive speed, and
that the direction of rotation reverses when you drive in reverse.
2.16.5
Coupled machines
•
Observe the permitted combination options of the attachment
equipment on the tractor and the machine drawbar.
Only couple permitted combinations of vehicles (tractor and at-
tached machine).
•
On single axle machines, observe the maximum permitted draw-
bar load of the tractor on the attachment equipment.
•
Ensure that the tractor has sufficient steering and braking power.
Machines attached or coupled to a tractor influence the driving
behaviour and steering and braking power of the tractor, and in
particular single axle machines with drawbar loads on the tractor.
•
Only one specialist workshop can adjust the height of the draw-
bar if it is a straight drawbar with drawbar load.
2.16.6
Brake system
•
Only specialist workshops or recognised brake services can
carry out adjustment and repair work on the brake system.
•
Have the brake system thoroughly checked regularly.
•
If there are any malfunctions, stop the tractor immediately using
the brake system. Have the malfunction rectified immediately.
•
Before performing any work on the braking system, park the
machine safely and secure the machine against unintentional
lowering or rolling away (wheel chocks).
•
Be particularly careful when carrying out any welding, torch cut-
ting or drilling work in the area of the brake lines.
•
Always carry out a braking test after any adjusting or repair work
on the braking system.
UX Super
BAG0054.10 11.16
35
