Cleaning, maintenance and repair
•
Check tyre pressures regularly when the tyres are cold, i.e. be-
fore starting a run (see page 55).
•
The difference in pressure between the tyres on one axle must
be no greater than 0.1 bar.
•
Tyre pressure can be raised by up to 1 bar after a fast run or in
warm weather. Tyre pressure should on no account be reduced
as it is then too low when the tyres cool down.
12.8.2
Fitting tyres
•
Remove any instances of corrosion from the wheel rim seating
surfaces before fitting a new / another tyre. Corrosion can cause
damage to the wheel rims when the vehicle is in operation.
•
When fitting new tyres, always use new valves for tubeless tyres
or new inner tubes.
•
Always fit the valves with valve caps which have a gasket insert.
12.9
Hydropneumatic sprung suspension
Check if the screws are mechanically secure.
Note the specified tightening torque.
Fig. 170
12.10
Drawbar
Check if the screws are mechanically secure.
Note the specified tightening torque.
Fig. 171
UX Super
BAG0054.10 11.16
207
