Construction and function of the sprayer boom
6.12.4
Drag hose equipment for
Super-L
boom (optional)
•
with dosing discs for late top dressing with liquid fertiliser
Fig. 114/...
(1) Drag hoses at 25 cm intervals, after fitting
the 2nd spray line.
(2) Bayonet connection with dosing discs.
(3) Metal weights - stabilise the position of the
hoses during operation.
Fig. 114
Fig. 115
Fig. 116
Fig. 117
Fig. 115/...
(1) Deflector hoop for the transport position.
(2) Transport position raised by lowering the
transport hook
(3) Spacing runners
Remove both spacing runners (Fig.
115/3) when operating drag hoses.
Fig. 116/...
(1) one setting tap for every boom part width
section:
a
Spraying via both spray lines with drag
hoses
b
Spraying via a standard spray line
c
Spraying via the 2nd spray line only
Remove drag hoses for normal spray-
ing operation.
After removing the drag hoses, seal off
the nozzle bodies with blanks
Fig. 117/...
(1) Transport hook
Screw on both transport hooks lower
down when operating drag hoses. In
transport position, the distance be-
tween nozzle and mud guard must be
20 cm.
For normal spraying, screw both
transport hooks back into the original
position.
128
UX Super
BAG0054.10 11.16
