Amazone TSE 3000, Руководство по эксплуатации

Страница: 75 / 98

9.1.3 Checking the TwinTeC concave disc spacing
INTERVAL
50 operating hours
or
weekly
1. Rotate the concave disc 1 .
2.
If the discs touch slightly, the first disc carries
the second disc along.
The spacing is correctly set.
or
If the first disc does not carry the second disc
along,
adjust the concave disc spacing.
1
CMS-I-00003244
3. Remove the bolts 8 .
4. Remove the concave disc 7 .
5. Remove the sealing ring 5 .
6. Remove the central bolts 6 .
NOTE
The central bolts have different threads:
The right central bolt has right-hand thread
The left central bolt has left-hand thread
7.
To ensure that the concave discs touch slightly,
adjust the spacing of the concave discs with the
spacer discs
4 and 2 .
8. Install spacer discs that are not required on the
opposite side of the concave disc bearing 3 with
the central bolt.
9. Install the concave disc bearing on the coulter
1 .
10. Install the central bolt.
100 Nm
1
3
4
6 7 8 5
2
17 Nm
CMS-I-00003234
CMS-T-00004447-A.1
9 | Repairing the machine
Maintaining the machine
MG6860-EN-II | A.1 | 20.07.2020 71