Amazone TSE 3000, Руководство по эксплуатации

Страница: 50 / 98

11.
If the seeding rail has a tramline marker,
Connect the supply line of the seeding rail to the
soil tillage implement
1 .
1
CMS-I-00003485
6.3
Preparing the implement for operation
6.3.1 Adjusting the working position sensor
The working position sensor monitors the implement
position in the three-point hydraulic system and
switches the metering drives. The length of the
actuation lever is adjustable. For safe actuation, the
control lever must rest on a level contact surface.
1. loosen the nut 1 .
2.
To rest the control lever
2
on a level contact
surface,
set the position of the control lever in the desired
position on the top link
3 .
3. Tighten the nut.
4.
To configure the working position sensor,
refer to the ISOBUS operating manual,
"Configuring the working position sensor" .
1 2 3
CMS-I-00002608
CMS-T-00004887-A.1
CMS-T-00003625-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6860-EN-II | A.1 | 20.07.2020 46