Amazone TSE 3000 Скачать руководство пользователя страница 24

Страница: 24 / 98

Securing the machine

After uncoupling, the implement has to be
secured. If the implement and implement parts
are not secured, there is a risk of personal injury
due to crushing and cutting.

Only park the implement on stable and level
ground.

Before you depressurize the hydraulic lines
and disconnect them from the tractor,

move the implement into working position.

Protect people against direct contact with
sharp-edged or protruding implement parts.

Make sure that the protective equipment is
functional

If protective equipment is missing, damaged or
removed, implement parts can cause serious
personal injury or even death.

Check the implement at least once a day for
damage, proper installation, and functioning
of the protective equipment.

If you are not sure if the protective
equipment is properly installed and
functional,

have the protective equipment checked by a
qualified specialist workshop.

Make sure that the protective devices are
properly installed and functional before any
work on the implement.

Replace damaged protective equipment.

2 | Safety and responsibility

Safety routines

MG6860-EN-II | A.1 | 20.07.2020

Содержание TSE 3000



































































































Результаты поиска

Содержание TSE 3000

Отзывы:

Бренды по названию

Популярные бренды

Amazone TSE 3000, Руководство по эксплуатации

Результаты поиска

Содержание TSE 3000

Отзывы:

Бренды по названию

Популярные бренды