manualshive.com logo in svg

Amazone TSE 3000, Руководство по эксплуатации

Поделиться
Скачать
Amazone TSE 3000 Скачать руководство пользователя страница 49

4. Install the safety clips 

2

 on all of the brackets

1

.

The brackets are connected to the roller frame.

1

2

CMS-I-00003593

Connect the distributor head holder to the roller
frame.

5. Put the stirrup bolt 

1

 around the roller frame.

6. Install the washers 

2

.

7. Install the nuts 

3

 and tighten them.

CMS-I-00003139

 

WARNING 

 

The parking supports do not have a
locking device.

To prevent the parking supports from
falling out of the mount while driving,

remove the parking supports.

 

8. Lift the soil tillage implement with the coupled

seeding rail.

9. Remove the parking supports 

1

 from the

implement 

2

 on both sides.

10. Route the supply line for the job computer over

the centre frame to the interface on the hose
package.

CMS-I-00003115

6 | Preparing the machine

Coupling the implement 

MG6860-EN-II | A.1 | 20.07.2020

45

Содержание TSE 3000



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды