Amazone ED 302 Скачать руководство пользователя страница 167

Страница: 167 / 196

Use of the implement

ED 02 BAH0023.0 03.14

167

10.4

Track marker operation

DANGER

•

It is forbidden to stand in the swivelling area of the track
marker!

•

When operating the tractor control unit, depending on the
switch position, one of the track markers folds out.

•

There are crushing and shearing points between the track
markers and the implement. Never reach into the crush area
while folding the track marker in and out.

Start of work or after turning at the end of the field:

Set the tractor control unit 1 to the float position

→

The track markers lower.

Before turning at the end of the field, or before an obstacle:

Pressurise the tractor control unit 1

→

Both track markers are lifted up.

If the wrong track marker lowers when the tractor control unit 1 is put
in the float position, switch through the control unit multiple times.

The automatic changeover of implements with ED-CONTROL is only
active when the implement has taken up speed in the working
position.

Содержание ED 302





































































































































































































Результаты поиска

Содержание ED 302

Отзывы:

Бренды по названию

Популярные бренды

Amazone ED 302, Руководство по эксплуатации

Результаты поиска

Содержание ED 302

Отзывы:

Бренды по названию

Популярные бренды