Amazone ED 302, Руководство по эксплуатации

Страница: 128 / 196

Settings
128 ED 02 BAH0023.0 03.14
8.14 Adjusting the seed placement depth (classic sowing unit)
Set the seed hopper cover horizontally be lengthening or shortening
the top link.
1. Bring the implement to the working position
in the field (see section "Use of the
implement", Seite 162).
2. Release the spring clip (Fig. 133/1).
The spring clip secures the crank Fig.
133/2) from turning.
3. Using the crank (Fig. 133/2), adjust to the
desired placement depth.
Turning the crank
→
to the right (clockwise): reduce
working depth
→
to the left (anticlockwise): increase
the working depth
4. Secure the crank (Fig. 133/2) with the clip
(Fig. 133/1) to prevent it turning.
5. Check the placement depth of the first
sowing unit (see section "Checking the
placement depth and grain spacing", Seite
109) and correct if needed.
The maximum placement depth is 10
cm!
If the desired seed placement depth is not
reached, adjust the weight of the sowing
unit (load) on the sowing coulters [see
section "Adjusting the loading level", Seite
129].
6. Adjust all the sowing units to the loading
level and the crank setting of the first
sowing unit. Read the crank setting from
the scale (Fig. 133/3).
7. Finally, check the placement depth of all
the sowing units (see section "Checking
the placement depth and grain spacing",
Seite 109).
Fig. 133