Amazone ED 302, Руководство по эксплуатации

Страница: 164 / 196

Use of the implement
164 ED 02 BAH0023.0 03.14
10.1 Starting work
DANGER
•
Direct people out of the danger area of the implement, in
particular from the swivel zone of the implement extension
arms and the track markers.
•
Actuate the tractor's control units only in the tractor cab.
Position the seed hopper cover (Fig. 193/1) horizontally by
lengthening or shortening the top link (Fig. 193/2).
1. Fold out the implement booms (see section
"Fold the implement booms", Seite 165).
2. Set the precision airplanter down at the start
of the field.
3. Disengage the tractor universal joint shaft,
engage the tractor parking brake, shut off
the tractor engine and remove the ignition
key.
4. Unlock the track markers (only ED 302 and
ED 452 [-K]),
[see section "Track marker transport lock",
Seite 165].
5. Set the track markers in the working
position (see section " Track marker
operation", Seite 167).
6. Set the blower fan to the correct speed (see
section "Blower fan speed", Seite 116).
7. Set the control unit for the tractor lower link
to the float position and operate it during
work in the float position.
8. Switch on the tractor PTO shaft.
To avoid damage, only engage the PTO
shaft slowly in neutral or at low tractor
engine speed.
9. Drive off with the tractor.
Fig. 193
Check after the first 30 m, correct if necessary
10. Seed placement depth and grain spacing
(see section "Checking the placement depth
and grain spacing", Seite 109).