The setup functions are organised in blocks or sections e.g. all the settings for channel 1 alarms are in
the
AL1
section. Once access to setup functions has been gained use the
^
and
v
buttons to select
the section required then press
F
to enter this section and again us the
^
and
v
buttons to select the
required function for alteration and press
F
to allow alteration of this function.
Typical sections for a basic instrument are illustrated below. In any particular instrument additional sec-
tions may appear depending on the part number and any optional outputs fitted.
Alarm setup
functions
e.g.
AL1
Alarm configure
functions
AL.CF
Relay setup
functions
e.g.
RL 1
Use
^
or
v
to move to
the section required then
press
F
to access the
functions in that section.
Press
P
to escape the
section you are in or
press
F
at the
End
function in the section.
Display setup
functions
diSP
Input configure
functions
IN1
Remote input
functions e.g.
R.INP
8 of
LD5RSMAN-2.0-0
