Amada MM-L300A, Оригинальное руководство пользователя

Страница: 130 / 180

MM-L300A
9. Interface
9-4
(2) SENSOR
This is a connector (20-pin) to make a connection with the
SU-N300A/SG-N300A
.
This connector can send the signal detected by the
SU-N300A/SG-N300A
to the
MM-L300A
.
Do not connect a cable other than the dedicated cable.
(3) TRIGGER
By inputting the external trigger signal to the
MM-L300A
, can be measured in an
arbitrary timing.
MEASURE is the signal during obtaining data. Refer to
(4) Timing Chart .
Pin No. Description
1 +24V OUT (+24V (out))
Power supply for external input signals. This pin is exclusively used for the
MM-L300A
. Do not use it for any other purpose.
2 External trigger input signal (EXT TRG+ (in))
When the circuit between EXT TRGs is closed, the
MM-L300A
starts
measurement. 24 V is input.
3 External trigger input signal (EXT TRG- (in))
When the circuit between EXT TRGs is closed, the
MM-L300A
starts
measurement. 0 V is input.
4 0V OUT (GND)
GND for external input signals. This pin is exclusively used for the
MM-L300A
. Do
not use it for any other purpose.
5 Measuring signal (MEASURE OUT+ (out))
When the
MM-L300A
is measuring waveforms, the circuit between MEASURE
OUTs is closed internally.
6 Measuring signal (MEASURE OUT- (out))
When the
MM-L300A
is measuring waveforms, the circuit between MEASURE
OUTs is closed internally.
6 1
5 2
4 3