MG3 Hot Bar
How to …?
76609576EN-MG3-HB-V1_0a.docx 46/49
5.18
Transfer Data to PC/Laptop
Disable the USB stick before you remove it from the PC.
Caution
File structure
Data on the USB stick is stored in four directories.
DATA contains files with the file name extensions:
*.bmp
(screenshots)
*.txt
(text file of the parameters)
*.par
(parameter file)
LOGGING contains files with the file name extensions:
*.log
(log file)
UPDATE contains update files with the file name extension:
*.gz
(Update-File)
*.mot
(Update-File for mainboard)
WAVEFORM contains files with the file name extensions:
*.crv
(measured curve)
Note:
Files with file name extensions *.log and *.crv are saved as CSV format
(Comma Separated Value format) and can be further processed with Excel
for instance.
5.19
Make a Screenshot of the Current Display
To make a screenshot of the current display, press the screenshot button on
the front of the MG3 (see chap. 4, fig. 4).
It is automatically saved on the USB stick as a .bmp file with the prefix
"SSH_xxx" (xxx means a consecutive number).
The LED on the USB stick illuminates for a few seconds for each successful
screenshot and a message is generated in the status line.
5.20
Register the Device
Depending on delivery it may be necessary to register the device for
unlimited use.
The
MG3 Hot Bar
can be supplied as a 30 day test version or as full version.
Check your version at screen PASSWORD.
In case of the 30 day test version you find there a serial number and a
“Register” button and also the remaining days left.
In the test version all full version functions can be used for max 30 days.
When this test time period expires, all operating elements are blocked and
you are asked for a password to activate the full version.
Request the password by e-mail or telephone from Amada Miyachi Europe
GmbH. For this you need the identification number (S/N) shown on the
PASSWORD screen.
After entering the password the MG3 Hot Bar is enabled for unlimited use.