MG3 Hot Bar
Commissioning
76609576EN-MG3-HB-V1_0a.docx 14/49
3.1.2.4
Connector X38 (I/O Inputs)
Pin Name
Chan
.
Function
22 Ground
connection
Common connection of the inputs.
35 n/c
36 n/c
37 n/c
38 n/c
39 Reference run
part detection
1 and 2 High: part detection without inserted part
for reference run
(can also be actuated with the reference
button on the display)
41 n/c
42 n/c
43 n/c
44 n/c
45 Null Sinking
2
Triggers with rising edge, cooling time
with falling edge.
46 Null Sinking
1
Triggers with rising edge, cooling time
with falling edge.
47 Parts Detection
2
Set parts detection = HWScan.
Measured value is evaluated and part min.
2 – max. 2 is set.
48 Parts Detection
1
Set parts detection = HWScan.
Measured value is evaluated and part min.
1 – max. 1 is set.
49 Start Measure
2
Starts part detection 2 for sensor 2.
50 Start Measure
1
Starts part detection 1 for sensor 1.
3.1.2.5
Connector X51 (RS232) / Baud rate
Pin
Name
Pin
Name
1
free
6
free
2
TxD
7
CTS
3
RxD
8
RTS
4
5V
9
free
5
GND
Baud rates (bit/s)
9600; 19200; 38400; 57600; 115200
Data bits
8
Start bits
1
Stop bits
1
Parity
none
Busy Control
no/off