Alvarion BreezeACCESS Wi2 Скачать руководство пользователя страница 7

Страница: 7 / 252

BreezeMAX Wi² and BreezeACCESS Wi² System Manual

Legal Rights

Important Notice

This user manual is delivered subject to the following conditions and restrictions:

This manual contains proprietary information belonging to Alvarion Ltd. Such information is

supplied solely for the purpose of assisting properly authorized users of the respective Alvarion

products.

No part of its contents may be used for any other purpose, disclosed to any person or firm or

reproduced by any means, electronic and mechanical, without the express prior written

permission of Alvarion Ltd.

The text and graphics are for the purpose of illustration and reference only. The specifications

on which they are based are subject to change without notice.

The software described in this document is furnished under a license. The software may be used

or copied only in accordance with the terms of that license.

Information in this document is subject to change without notice.

Corporate and individual names and data used in examples herein are fictitious unless otherwise

noted.

Alvarion Ltd. reserves the right to alter the equipment specifications and descriptions in this

publication without prior notice. No part of this publication shall be deemed to be part of any

contract or warranty unless specifically incorporated by reference into such contract or

warranty.

The information contained herein is merely descriptive in nature, and does not constitute an

offer for the sale of the product described herein.

Any changes or modifications of equipment, including opening of the equipment not expressly

approved by Alvarion Ltd. will void equipment warranty and any repair thereafter shall be

charged for. It could also void the user's authority to operate the equipment.

Some of the equipment provided by Alvarion and specified in this manual, is manufactured and

warranted by third parties. All such equipment must be installed and handled in full compliance with

the instructions provided by such manufacturers as attached to this manual or provided thereafter by

Alvarion or the manufacturers. Non-compliance with such instructions may result in serious damage

and/or bodily harm and/or void the user's authority to operate the equipment and/or revoke the

warranty provided by such manufacturer.

Содержание BreezeACCESS Wi2





























































































































































































































































Результаты поиска

Содержание BreezeACCESS Wi2

Отзывы:

Бренды по названию

Популярные бренды

Alvarion BreezeACCESS Wi2, Системное руководство

Результаты поиска

Содержание BreezeACCESS Wi2

Отзывы:

Бренды по названию

Популярные бренды