Alvarion BreezeACCESS Wi2, Системное руководство

Страница: 158 / 252

136 BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Chapter 8 - Management
2 On the AP, create a RADIUS profile that will connect the AP to the RADIUS server. See
“Configuring a RADIUS Client Profile on the AP” on page 150.
3 Under Administrator authentication , set Authenticate via to the RADIUS profile you created
in step 2. In this example, the profile is called Rad-1 .
4
Enable Try local account if RADIUS unreachable. This will allow you to login using the local
account if the connection to the RADIUS server is unavailable.
5
It is recommended that before saving, you specify the Username and Password and select Test
to ensure that the RADIUS server is reachable and that the administrator account is working
properly.
8.1.3.3 Login Control
To maintain the integrity of the configuration settings, only one administrator can be connected to
the management tool at a given time. To prevent the management tool from being locked by an idle
administrator, two mechanisms are in place:
„
If an administrator’s connection to the management tool remains idle for more than ten minutes,
the AP automatically terminates the administrator’s session. You can configure this mechanism
on the management tool configuration page.
„
If a second administrator connects to the management tool and authenticates with the correct
username and password, the first administrator’s session terminates. You can configure this
mechanism on the management tool configuration page.
Figure 8-2: Administrator Authentication
CAUTION
If you do not enable the “Try local account if RADIUS unreachable option” and the service controller
is unable to reach the RADIUS server, you will not be able to login.