Alvarion BreezeACCESS Wi2, Системное руководство

Страница: 60 / 252

38 BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Chapter 3 - Hardware Installation Wi² Extender
The following table describes the wireless status LEDs:
Once the AP has established a secure tunnel with a CTRL, the status lights revert to their normal
operation:
„
Power light is solid to indicate that the AP is fully operational
„
Ethernet light blinks to indicate the presence of traffic on the Ethernet port
„
Wireless light blinks to indicate the presence of traffic on the wireless port
11a LEDs Status Description
Right Pair Center Pair Left Pair
Off Off Off The radio is disabled or unit is still booting up
Blinking-
slowly
Off Off No signal detected or RSSI is below -88 dBm
Blinking-
fast
Off Off RSSI is between -88 dBm and -87 dBm
Blinking-
very fast
Off Off RSSI is between -86 dBm and -85 dBm
On Off Off RSSI is between -84 dBm and -82 dBm
On Blinking-
slowly
Off RSSI is between -81 dBm and -80 dBm
On Blinking-
fast
Off RSSI is between -79 dBm and -78 dBm
On Blinking-
very fast
Off RSSI is between -77 dBm and -76dBm
On On Off RSSI is between -75 dBm and -74 dBm
On On Blinking-
slowly
RSSI is between -73 dBm and -72 dBm
On On Blinking-
fast
RSSI is between -71 dBm and -70 dBm
On On Blinking-
very fast
RSSI is between -69 dBm and -68 dBm
On On On RSSI is over -67dBm