Alvarion BreezeACCESS II, Системное руководство

Страница: 260 / 324

A-2
BreezeACCESS Version 4.5 System Manual
Manual Revision: 1.0
The Configuration Download/Upload feature in BreezeACCESS units
simplifies the task of remotely configuring a large number of units using
TFTP protocol.
By downloading the configuration file to a PC it is possible to view all the
parameters configured at the unit, as it is a plain text ASCII file.
It is necessary to edit the file by a using simple editor and to remove
certain parameters or change their values prior to uploading the
configuration to another unit.
When multiple configuration is performed (uploading the file to several
units) it is recommended that only the relevant parameters be included
in the file .
Each parameter is represented in the file by three fields:
! A symbolic string similar to the name of the parameter in the
monitor program, followed by “=”.
! The value of the parameters (using the same values that are used in
the monitor program).
! A comment (optional). If used, it should start with a “;” character.
The unit will ignore an unknown parameter. In the case of a known
parameter with an out of range value, the default value will be used.
Use the SNMP write community string (the default is “private”) to define
both the uploaded file (put) and the downloaded file (get):
SnmpWriteCommunity.cfg
The file should be transferred in ASCII mode.
Example:
To upload the configuration file using DOS based TFTP Client to an SU
whose IP address is 206.25.63.65:
tftp 206.25.63.65 put Suconf private.cfg
To download the configuration file from the same unit:
tftp 206.25.63.65 get private.cfg Suconf