Alvarion BreezeACCESS II, Системное руководство

Страница: 238 / 324

2-108
BreezeACCESS Version 4.5 Operations and Administration
Manual Revision: 1.0
gateway and sent over the IP network as IP fax packets (IFP) using
UDP.
Modulation methods that can be used with the T.38 format are V.21
Channel 2, V.27ter 2400, V.27ter 4800, V.29 7200, V.29 9600, V.17
7200, V.17 9600, V.17 12000, and V.17 14400.
The default selection is Disable .
!
Fax Relay Redundancy – Defines the redundancy (number of
additional times each fax frame is transmitted) to be used when
transmitting T.38 fax messages.
Valid values: 0 –5.
Default value: 3 .
! Dialing Prefix Parameters – Supports the definition of prefix
strings indicating an inter-regional or international call. The
algorithm supports dialing plans where one specific digit is used as
the prefix for inter-regional calls, and two specific digits are used as
the prefix for international calls, where the first one is the same as
the inter-regional call prefix. It can also support dialing plans in
which the inter-regional prefix should be removed at the CPE before
the dialed number is transferred to the system. The dialing plan
support algorithm incorporated into the units operates as follows:
#
If the Dialing Prefix Option is disabled the unit will insert the
Automatic Prefix (if defined) before the dialed number.
Otherwise it will be forwarded as dialed.
# If the Dialing Prefix Option is set to Enabled and the first
dialed digit differs from the Inter-Regional Prefix the unit will
insert the Automatic Prefix (if defined) before the dialed
number. Otherwise it will be forwarded as dialed.
# If the Dialing Prefix Option is set to Enable & Block
Inter-Regional Prefix and the first dialed digit differs from the
Inter-Regional Prefix, the unit will insert the Automatic
Prefix (if defined) before the dialed number. If the first dialed
digit is the Inter-Regional Prefix and the second one differs
from the International Prefix (indicating an inter-regional
call), the first digit (the Inter-Regional Prefix) will be removed
before forwarding the dialed number, thus blocking
inter-regional calls at the unit. Otherwise it will be forwarded
as dialed.
"
Dialing Prefix Option – Enables or disables the dialing prefix
support capability.
Valid options are: Disable, Enable, Enable & Block
Inter-Regional Prefix.
NOTE:
To enable the Fax Relay Option , the Fast Start parameter must also be
enabled.