Alvarado SU5000, Руководство по установке

Страница: 22 / 44

Supervisor 5000 Installation Instructions
Page 22 For assistance: support@alvaradomfg.com +1 (909) 591-8431 PUD3667R1-6
Barrier Installation (cont.)
2. Position the clamp bar on the barrier. Insert and tighten the
mounting screws and clamp bar to 44 in-lbs. Test to make
sure the barrier does not wiggle [Figure 25].
3. Once the barriers have been installed, check that they
are level and lined up properly in the Home position. If the
barriers do not line up in the Home position, the cabinets
may not be level. Refer to Page 13 for instructions on
leveling and squaring the cabinets.
Clamp Bar
Fig. 25
Fig. 26
Barriers
Level and
Lined
Up in the
Home
Position
NOTE : The barriers below are shown in the Home Position.
Tightening Mounting
Screws
Checking that Barriers are Level