Alvarado SU5000, Руководство по установке

Страница: 21 / 44

Supervisor 5000 Installation Instructions
PUD3667R1-6 For assistance: support@alvaradomfg.com +1 (909) 591-8431 Page 21
1. Locate the Ethernet extension cable tucked in the base of
the master/center cabinet [Figure 23].
2. Connect the Ethernet cable to the Ethernet extension
cable.
3. Tuck the Ethernet extension cable back into the base of the
cabinet.
It is assumed that Ethernet cabling has been run to the
turnstile via conduit and pulled through the conduit opening in
Step 6 of the Anchoring the Turnstile section.
NOTE
The barriers are shipped unattached to the turnstile. The
clamp bars and hardware are packaged in the box labeled
"HARDWARE ENCLOSED."
This installation requires two people: One
person will need to hold the barrier while the
other person inserts and tightens the mounting
screws.
1. Insert the barrier edge into the mounting groove on the
spindle, aligning the barrier and spindle mounting holes
[Figure 24].
Fig. 24
NOTE
Fig. 23
I/O Control Board
Inserting Barrier Edge
Barrier Installation
Ethernet Communication (Optional)
NOTE
Exercise care not to scratch the barriers during handling.
Do not lay or lean the barriers on an abrasive surface. If the
barriers are going to be cleaned, use only a soft cloth and a
cleaner suitable for acrylic surfaces.
Ethernet
Extension Cable