Model:
NettI S
Language:
English
Version:
2020-08
8
My-Netti.com
Drive carefully!
Be aware that friction against push
rims can create a warm surface.
Salt water can increase risk of
corrosion and must be avoided.
The anti-tips should always be used
for the safety of the user.
When the chair is tilted rearwards,
the anti tips and brakes should
always be in use.
Be sure to lock all handles properly.
Surface temperature of metal parts in
frame structure might increase when
exposed to direct sunlight.
Watch out for pinching danger when
folding and unfolding, tilting,
reclining and all other adjustment
movements.
Never stand on the foot plates due
to risk of tipping forwards.
Never lift the wheelchair by the leg
supports or arm supports.
For troubleshooting, see chapter 10.
For adjustments see chapters 6
Product configuration may vary
between different countries.
Illustrations may differ from the
delivered product.
For visually impaired people,
manuals and catalogues can be
downloaded at www.My-Netti.com
If in doubt - contact your dealer!
2.0 QUICK
REFERENCE
The content of this page is a summary
of the whole manual. It gives you a brief
introduction to the use and care of the
Netti S wheelchair.
The quick reference is not a
replacement for the manual, only a
reminder/check list.
• Unpack the wheelchair
• Fold the backrest up and mount the
recline gas strut to the backrest strut
bracket.
• Install the arm supports.
• Mount the leg supports.
• Fold up and adjust the push bow.
• Mount the head support.
• Install the cushions.
• Mount accessory.
(See chapter 5 for more information.
Mounting descriptions will follow the
accessory.)
ADJUST THE WHEELCHAIR TO THE USER:
Adjust seat depth and eventually the
wheelchair balance, foot board height,
armrest height, head support height and
depth, chair back cushion height.
For more information about adapting the
wheelchair to the user, please see:
My-Netti.com Knowledge centre.
