Model:
NettI S
Language:
English
Version:
2020-08
My-Netti.com
23
LOCKING THE LEG SUPPORT ANGLE
Angel adjustable leg supports
The red star wheel on the outside of the leg
support is used to fix the required leg support
angle.
CALF SUPPORT HEIGHT AND DEPTH
ADJUSTMENT
Loosen the two M6 screws holding the calf pad
arm and slide each calf pad up or down to de-
sired height. They should in addition to support-
ing the calf also help prevent the feet sliding
backwards from the footboard.
Turn the calf pads to an angle giving support
for the leg when the foot support is angled.
The calf pads can swing freely to follow the
movements and adjust to the user’s leg position.
Adjust the calf-pad depth by losing the M8
screw sitting inside the calf pad.
Position the calf pad backwards or for-
wards till it barely touches the user’s calf
with his/her feet resting on the footboard.
The feet should stay on the footboard with
the feet on the middle of it.
ANKLE HUGGERS
The footboard has holes prepared for ankle
huggers or shoe shells to be mounted as
accessories if required.
Ankle huggers are useful when involuntarily
leg movements slide the feet of the foot-
board.
Ankle huggers are mounted to the foot-
board by threading the fixing belts through
the holes in the footboard fixing them with
buckles on the underside of the footboard.
Netti S has also other leg support
alternative:
• Whole foot box (see chapter 5)
NETTI DYNAMIC S LEG SUPPORTS
are especially developed to allow for un-
even forces from the legs, unilateral exten-
sion of the hip (left or right part of the leg
support goes down).
The Netti Dynamic System Leg supports
are swingable and removable. They come
with height- and depth adjustable calf
supports.
Netti Dynamic S leg support
angle can be locked by tightening the red
star wheel on the outside of the leg sup-
port. This is necessary if sudden exten-
sion may harm persons standing by or
surrounding, and always when the chair is
used as a seat in a car.
Angle adjustable leg support
Universal leg support
