background image

Model: 

NettI S

Language: 

English

 Version: 

2020-08

 

My-Netti.com

 31

USERS, DRIVE UP A STEP 

BACKWARDS:

This technique is only useful if the step is 

very low. It also depends on the clearance 

between the foot plates and the ground.

• Check that the anti tip is turned up.

• Drive the chair backwards towards the  

  step.

• Make a firm grip on the push rims and  

   move the body forward while pulling.

Turn the anti tip down. 

COMPANIONS, DRIVE UP A STEP 

BACKWARDS:

 Check that the anti tip is turned up.

• Pull the chair backwards next to the step.

• Angle the wheelchair backwards, moving  

   the front castors slightly up in the air.

• Pull the wheelchair up the step and go 

   backwards long enough to put down the 

   front castors on the step.

Turn the anti tip down. 

8.3 DRIVING TECHNIQUES 

         - STEP DOWN -

COMPANIONS, DRIVE DOWN A 

STEP FORWARDS:

• Check that the anti tip is turned up

• Angle the wheelchair backwards,    

  moving the front castors slightly up in  

   the air.

• Drive carefully down the step and angle  

   the wheelchair forward putting the  

   front castors back on the ground.

Turn the anti tip do

wn.

COMPANIONS, DRIVE DOWN A 

STEP BACKWARDS: 

• Check that the anti tip is turned up.

• Move the wheelchair backwards to the  

   step.

• Drive carefully down the step and move  

   the wheelchair backwards on the main  

   wheel until the front castors have come  

   away from the step.

• Put the front castors down on the    

   ground.

Turn the anti tip down.

8.4 DRIVING TECHNIQUES 

             - SLOPE  -

Important advise for driving down and up 

hill avoiding the risk of tipping.

Avoid turning the wheelchair in the   

       middle of a slope.

Always drive as straight as possible.

It is better to ask for assistance than 

      

 taking risks.

DRIVING UPHILL:

Move the upper part of the body forwards 

in order to maintain the balance of the 

chair.

DRIVING DOWNHILL:

Move the upper part of the body 

backwards to maintain balance of the 

chair. Control the speed of the chair by 

clutching the push rims. Do not use the 

brakes.

Содержание NETTI S













































Отзывы: