Model:
NettI S
Language:
English
Version:
2020-08
My-Netti.com
15
6. ASSEMBLING
AND
ADJUSTMENT
6.1 UNPACKING
1. Unpack all the parts, and check that
everything is there according to the
packing list.
2. Unfold the chair back and mount the
recline cylinder to the chair back frame.
3. Mount anti-tippers
4. Pull up the arm supports to correct
height.
5. Place cushions and mount the leg
supports.
6. Mount accessories.
Weight of components
Main wheel 16” x 1,4”: 1,7 kg each
Front castors 6”: 0,6 kg each
Leg support: 2,1 kg (with foot board)
Back cushion Super Stabil S: 1 kg
Netti S Sit cushion: 0,8 kg
Head support A Mini: 0,75 kg
Necessary tools are described under each
chapter.
Accessories described in chapter 5
are presentations of options, and will
be delivered with separate mounting
descriptions.
6.2 MAIN WHEELS
16” x 1,4” ( 406 x 36 mm ) with drum brake
are installed by default from the factory.
22” main wheels can be ordered. They will
be installed from factory or authorized
personnel.
The 22” wheels have 4 degree camber
angle and drum brakes. The brakes are
operated independent on each side.
22” main wheels allow for higher seating
height.
6.3 FRONT FORK
Front forks come as standard
with quick release axles on top.
The front fork is easily removed
by pressing the QR knob.
The knob sits under the silicon
hat on top of the bearing house
Pull the axle downwards out of
the bearing house.
Check the angle of the
castor bearing house.
It should be close to vertical to the ground to
give good driving performance.
6.4 FRONT CASTORS
To take of
• Press the front fork quick release button.
To mount
• Lead the quick release axle into the
bearing house and push firmly.
Pull the fork slightly to ensure that the fork
is fully locked.
The foot-print of the wheelchair can be
increased by interchanging the front castor
bearing houses.
Sand and sea water (salt used for
gritting in the winter) can damage
the bearings of the front castors and
the main wheels.
Clean the wheelchair thoroughly after
exposure
