Alu Rehab Netti III HD Скачать руководство пользователя страница 8

Страница: 8 / 40

Language: English Model: Netti III HD Version: February 2013

2. QUICK REFERENCE

The content of this page is a summary

of the whole manual. It gives you a brief

introduction to the use and care of the

Netti III HD wheelchair.

The quick reference is not a replacement

for the manual, only a reminder/check
list.

• Unpack the wheelchair (Chapter 6.1)

• Mount the main wheels (Chapter 6.2)

• Mount the front castors (Chapter 6.4)

• Put the back rest back, and mount the

recline gas strut to the back rest using the

locking bolt. (Chapter 6.7)

• Mount the arm supports (Chapter 6.11)

• Mount the cushions (Chapter 6.12)

• Mount the foot supports (Chapter 6.14)

• Adjust the push handles (Chapter 6.16)

• Mount the head support (Chapter 6.15)

• Mount accessory. (See chapter 5. for more

information. Mounting descriptions will

accompany the accessory.)

For troubleshooting, see chapter 10.

For adjustments see chapters 6.

Drive carefully!

Be aware that friction against push

rims can create a warm surface.

Salt water can increase risk of

corrosion. Further precautions related

to environmental conditions not

needed.

When the chair is tilted rearwards,

the anti tips and brakes should

always be in use.

Be sure to lock all handles properly.

The anti-tips should always be used

for the safety of the user.

Surface temperature of metal parts in

frame structure might increase when

exposed to direct sunlight.

Never stand on the foot supports due

to risk of tipping forwards.

Never lift the wheelchair by the foot

supports or arm supports.

Product configuration may vary

between different countries.

For visually impaired people, manuals

and catalogues can be downloaded at
www.alurehab.com

If in doubt - contact your dealer!

Содержание Netti III HD









































Результаты поиска

Содержание Netti III HD

Отзывы:

Похожие инструкции для Netti III HD

Бренды по названию

Популярные бренды

Alu Rehab Netti III HD, Руководство пользователя

Результаты поиска

Содержание Netti III HD

Отзывы:

Похожие инструкции для Netti III HD

Бренды по названию

Популярные бренды