background image

10

  

Language: English  Model: Netti III HD  Version: February 2013

       

STANDARD    

 

 Seat

 

• Cushion with good pressure distributing  

    properties

 • Tilt -11° to +14° 

 • Adjustable height 40 cm to 48 cm

 • Adjustable depth of 10 cm

 Wheels*

 • Main wheels: 24” x 1 3/8” aluminium,  

 

          Puncture proof with quick   

     

          release axle

 • Push rim:  Alumium

 • Front castors: 7” wide. Puncture proof with  

 

          quick release axle.

Back rest

 • Angle: 88° - 130°  

 • Height: 50 cm

 • The back rest cushion has integrated   

    lumbar support and side support, and it 

    can be adjusted in height.

 • Height adjustable and removable push   

    handles.

Foot support

 

• Angle adjustable foot support

 • Height- and angle adjustable foot plates

 

 

Arm support 

 • Height adjustable and removable

 • Depth adjustable wide pads

Head support 

 • Height, depth and angle adjustable

 • Removable

   

ACCESSORIES/OPTIONS

 Seat

 • Sliding seat (See chapter 5)

 • Trays & reading stand for trays (See chapter 5)

 • Hip belts and 4 point belts (See chapter 5)

Wheels

 • Main wheels with drum brake.
 • Spoke protectors (See chapter 5)
 • Push rims (See chapter 5)

Back rest

 • 

Back rest extender 

(See chapter 5)

 • 

Lumbar support and Wedge 

(See chapter 5

)

 • 

Back rest cushions 

Foot support

• Universal foot support

• Amputation support

• Knee and thigh support (See chapter 5)

Arm support 

• Different pads (See chapter 5)

• Hemi armrest and Hemi cushion (See chapter 5)

Head support 

 • Different models (See chapter 5)

4. FEATURES OF NETTI III HD

Содержание Netti III HD









































Отзывы: