Alu Rehab Netti III HD Скачать руководство пользователя страница 29

Страница: 29 / 40

Language: English Model: Netti III HD Version: February 2013

Companions, drive up a step forwards:

• Check that the anti tip is turned up

• Angle the wheelchair backwards.

• Lift the push handles while pushing the

chair onto the step.

Turn the anti tip down.

Users, drive up a step backwards:

This technique is only useful if the step is very

low. It also depends on the clearance between

the foot plates and the ground.

• Check that the anti tip is turned up.

• Drive the chair backwards towards the step.

• Make a firm grip on the push rims and move
the body forward while pulling.

Turn the anti tip down.

Companions, drive up a step backwards:

• Check that the anti tip is turned up

• Pull the chair backwards next to the step

• Angle the wheelchair backwards, moving

the front castors slightly up in the air.

• Pull the wheelchair up the step and go

backwards long enough to put down the

front castors on the step.

Turn the anti tip down.

8.3 Driving techniques

- Step down -

Users, drive down a step forwards:

This technique is only for very experienced

users.

• Check that the anti tip is turned up.

• Drive towards the step.

• Make a firm grip on the push rims and

push fast forward so that the wheelchair

comes down on all four wheels at the
same time.

Turn the anti tip down.

Companions, drive down a step

forwards:

• Check that the anti tip is turned up

• Angle the wheelchair backwards, moving

the front castors slightly up in the air.

• Drive carefully down the step and angle

the wheelchair forward putting the front

castors back on the ground.

Turn the anti tip down.

Users, drive down a step backwards:

This technique is only for very experienced

users. This technique should not be used if

the height of the step is more than 10 cm.

• Check that the anti tip is turned up.

• Move the wheelchair backwards to the

step.

• Move carefully down the step backwards

while moving the body forward to keep

the balance of the chair.

Doing this increases the risk of

tipping backwards.

Turn the anti tip down.

Содержание Netti III HD









































Результаты поиска

Содержание Netti III HD

Отзывы:

Похожие инструкции для Netti III HD

Бренды по названию

Популярные бренды

Alu Rehab Netti III HD, Руководство пользователя

Результаты поиска

Содержание Netti III HD

Отзывы:

Похожие инструкции для Netti III HD

Бренды по названию

Популярные бренды