Alu Rehab Netti III HD Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 40

Alu Rehab Netti III HD Скачать руководство пользователя страница 21

21

Language: English Model: Netti III HD Version: February 2013

6.13 Adjusting the velcro back

• Loosen the straps, and place the back

rest cushion so that user gets room for the

bottom and the integrated lumbar support

in correct position.

• Tighten the straps so that they follow the

curvature of the spine and gives a little

extra support at the top of the sacrum.

6.14 Foot supports

The evelating foot support is angle adjustable,

swingable and removable. It comes with

height- and depth adjustable calf support. The

foot plates are hinged, and can be angled in

fixed positions. As a standard the foot plates

come with a locking bolt which makes the

plates stronger (See picture page 20) . The bolt

can be removed by using a pair of circlip pliers.

Netti III HD has the following foot support

alternatives:

• Universal foot support

• Amputation support

See chapter 5 for pictures.

Mounting of the foot support:

• Raise the support a few degrees.

• Fold the foot plates up.

• Hold the foot support in the angle on top,

and place it in the pull out piece in an

angle as shown in picture below.

• Swing the foot support inwards and push

slightly downwards until it goes into

locked position.

When moving the foot support up or down,

do not put the fingers in the adjusting

mechanism between the moving parts.

«
...
19
20
21
22
23
...
»

Содержание Netti III HD









































Отзывы:

Нет отзывов