Alu Rehab Netti III HD, Руководство пользователя

Страница: 20 / 40

20
Language: English Model: Netti III HD Version: February 2013
The anti tips are delivered adjusted
according to ordered main wheel size in
standard position. If other adjustments
are carried out, anti-tips have to be
adjusted accordingly.
Adjusting anti tip
The anti tips must be adjusted whenever
position or dimension of main wheels is
changed.
Correctly adjusted anti tips should be
positioned just on the inside of the radius
of the main wheel. Anti tips are adjusted as
follows:
• Unfix the locking clamp on the anti tip bar
using an Allen key.
• Pull or push the bar to required position.
• Fix the locking clamp.
• Do the same procedure on the opposite side.
6 mm Allen key
Check that both anti tips have the
same length. The gap between the
anti tip wheels and the ground must be
max. 3 cm.
If the anti tip is positioned on the
outside of the main wheel radius, it
will interfere with curbs and stairs.
The anti tip should always be used
for the safety of the user.
6.11 Adjusting arm supports
• Turn the release handle to the side and hold.
• Adjust the armrest to the required height
and release the handle. Lift or lower the
armrest slightly until it locks.
The armpad and locking screw are set
in the middle position. This can be
adjusted to fit the user.
6.12 Cushions
Cushions are fixed and adjusted
on the wheelchair using the velcro.
It is imperative to correctly set-up the
cushion in order to ensure good
seating comfort
The cushion covers are washable and
thereby reuseable. Follow the
instruction on the back of the
cushion for correct maintenance and
washing