KN9108 / KN9116 User Manual
64
The meanings of the adjustment options are given in the table below:
Option
Usage
Screen Position
Adjust the horizontal and vertical position of the remote
computer window by Clicking the Arrow buttons.
Auto-Sync
Click Auto-Sync to have the function detect the vertical and
horizontal offset values of the remote screen and automatically
synchronize it with the local screen.
If the local and remote mouse pointers are out of sync, in most
cases, performing this function will bring them back into sync.
Note:
This function works best with a bright screen.
If you are not satisfied with the results, use the Screen Position
arrows to position the remote display manually.
RGB
Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component
of the image is correspondingly increased.
Gamma
This section allows you to adjust the video display's gamma
level. This function is discussed in detail in the next section,
Gamma Adjustment
.
Video Quality
Drag the slider bar to adjust the overall Video Quality. Values can
be from 20 to 100. The larger the value, the clearer the picture
and the more video data goes through the network. Depending
on the network bandwidth, a high value may adversely effect
response time.
Bandwidth Control
This setting adjusts the ratio between picture quality and network
speed. For slow data connections, drag the slider bar to a lower
setting to decrease the amount of video data transferred. This
ensures screen refresh at workable speeds.
kn9108_9116_2007-09.book Page 64 Friday, September 21, 2007 10:39 AM
