KN9108 / KN9116 User Manual
34
IP
and
MAC Filters
control access to the KN9108 / KN9116 based on the
IP and/or MAC addresses of the computers attempting to connect. A
maximum of 100 IP filters and 100 MAC filters are allowed. To enable IP
and/or MAC filtering,
Click
to put a check mark in the
IP Filter Enable
and/or
MAC Filter Enable
checkbox.
If the include button is checked, all the addresses within the filter range
are allowed access to the KN9108 / KN9116; all other addresses are
denied access.
If the exclude button is checked, all the addresses within the filter
range are denied access to the KN9108 / KN9116; all other addresses
are allowed access.
To add a filter, Click
New
. A dialog box similar to one of the ones below
appears:
Note:
Each IP filter can consist of a single address, or a range of addresses.
To filter a single IP address, key in the same address in both the
From
and
To
fields. To filter a continuous range of IP addresses, key
in the start of the range in the
From
field; key in the end of the range
in the
To
field.
After you specify the filter addresses, Click
OK
.
To delete a filter, select it and Click
Remove
.
To modify a filter, select it and Click
Edit
. The
Edit
dialog box is similar
to the
New
dialog box. When it comes up, simply delete the old address
and replace it with the new one.
kn9108_9116_2007-09.book Page 34 Friday, September 21, 2007 10:39 AM
