KN9108 / KN9116 User Manual
12
Rack Mounting
The KN9108 / KN9116 can be mounted in a 1U system rack. For convenience
and flexibility, the mounting brackets can screw into either the front or the back
of the unit so that it can attach to the front or the back of the rack. Alternately,
the front and rear modules can be separated so that the front module can be
mounted at the front of the rack while the rear module is mounted at the rear.
To rack mount the unit do the following:
1. Remove the four screws that attach the front and rear modules.
2. Using the screws provided with the rack mounting kit, screw the rack
mounting brackets into the sides of the unit at the front and/or the rear, as
shown in the diagrams below.
3. Slide the unit into the rack and secure it to the rack.
Phillips hex head
M3 x 8
Phillips hex head
M3 x 8
kn9108_9116_2007-09.book Page 12 Friday, September 21, 2007 10:39 AM
