Appendix
109
Additional Mouse Synchronization Procedures
If the mouse synchronization procedures mentioned in the manual fail to
resolve mouse pointer problems for particular computers, try the following:
Note:
1. These procedures are to be performed on the computers attached to
the KN9108 / KN9116's ports - not on the computer you are using to
access the KN9108 / KN9116.
2. In order for the local and remote mice to synchronize, you must use
the generic mouse driver supplied with the Windows operating
system. If you have a third party driver installed - such as one
supplied by the mouse manufacturer - you must remove it.
1. Windows 2000:
Set the mouse speed to the middle position; set the mouse acceleration to
None
(Control Panel
→
Mouse
→
Mouse Properties
→
Motion):
kn9108_9116_2007-09.book Page 109 Friday, September 21, 2007 10:39 AM
