EPC-250 IOI 6-18 All rights reserved © ALTRONIC, LLC 2018
3
2.0 MOUNTING THE EPC-250
2.1
The EPC-250 is preferably panel-mounted off the engine in such a manner as
to minimize exposure to vibration. It has been designed as an easy retrofit for
the existing EPC-200 with little to no rewiring needed.
2.2
The EPC-250 controller should be mounted within 50 ft. of the exhaust stack
of the engine.
2.3
Operating temperature range: -4° – 140°F / -20° – 60°C
Storage temperature range:
-20° – 70°C
Storage humidity:
80% maximum relative humidity
(non-condensing) from 0 to 50°C.
The EPC-250 is not rain and weather resistant. The mounting site should
provide as much protection from inclement weather as possible.
Waste Gate Control
or Other Air/Fuel Ratio
Control
4–20mA
To Altronic CPU Ignition or Other
Ignition Timing Control
Six Output Switches
for Optional Sequencing
or Control
Ethernet Output to PC
or Other System
4–20mA
POWER
24VDC
COMMUNICATIONS
Typical Inputs
Engine Speed
Fuel Manifold Press.
Air Manifold Press.
Air Manifold Temp.
Pilot Manifold Press.
