Altrad TRON-2400L-40, Оригинальное руководство пользователя

Страница: 26 / 27

2 6
T
T
r
r
a
a
n
n
s
s
p
p
o
o
r
r
t
t
Remove mains plug before each
transport.
Transport the chain only with the chain protection put on.
When transporting the product within a car put it in the boot or
on a separate loading area. Secure the chain saw against
tipping over.
S
S
t
t
o
o
r
r
a
a
g
g
e
e
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
B
thoroughly clean the chain saw
B Remove the oil from the oil tank.
Hint:
Some chain oils tend to encrustations after a longer
period. For this reason the oil system should be flushed
before a longer storing with a chain saw cleaner. Fill the
cleaner up to the middle (appr. 50 ml) into the oil tank.
Close the tank. Switch on the chain saw without
assembled guide bar and chain until the complete
cleaner has left the oil opening of the chain saw.
B
Put the saw chain for a short time into an oil bath and
enwrap it afterwards in an oil paper .
G
G
u
u
a
a
r
r
a
a
n
n
t
t
e
e
e
e
Please observe the enclosed terms of guarantee.
P
P
o
o
s
s
s
s
i
i
b
b
l
l
e
e
f
f
a
a
u
u
l
l
t
t
s
s
Before each maintenance and cleaning work
−
switch off device
−
wait for stop of chain saw
−
pull out main plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Removal
Chain saw does not initiate
after switching on  Chain brake
 no power
Â
Extension cable damaged
Â
Main plug, motor or switch defect
 Release chain brake
 Check power supply, power outlet, fuse
protection
Â
Check extension cable, exchange defect cable
immediately
Â
Have motor or switch checked by an approved
electrician or replaced by original spare parts.
Chain saw works with
interruptions
Â
external loose connection
Â
internal loose connection
 Circuit closer/breaker defect
Â
Check power supply, power outlet, fuse
protection
Â
Check extension cable, exchange defect cable
immediately
Â
Please contact the after sales service.
Chain saw picks, vibrates or
does not saw correctly
Â
Chain edgeless
Â
Chain worn
Â
Chain tension
Â
Chain not assembled correctly (teeth face
to wrong direction)
Â
Chain must be regrinded or exchanged
Â
Exchange chain
Â
Check and adjust chain tension
Â
Assemble chain again
Chain saw does not work with
full power
Â
Extension cable too long or diameter too
small
Â
Power outlet to far away from main
connection
Â
Use extension cable with sufficient diameter
Â
Use power outlet which is nearer within the
working area
Saw chain gets hot
Â
no oil in the tank
Â
oil flow canal blocked
Â
chain tension too high
Â
Chain edgeless
Â
Refill oil
Â
Clean oil flow canal
Â
Adjust chain tension
Â
Chain must be regrinded or exchanged
no saw chain lubrication  no oil in the tank
Â
oil flow canal blocked
 Refill oil
Â
Clean oil flow canal