Alto-Shaam Converge CMC-H2H Скачать руководство пользователя страница 85

Страница: 85 / 104

AINTENANCE

Converge®

▪

Operator’s Manual

▪

MN-47238

▪

Rev 1

▪

8/22

AINTENANCE

Maintenance Schedule

Requirements

▪

topic

How to Clean the Oven

▪

Make sure

the oven is cooled down and off—inside of chamber 140°F (60°C) or

less.

Daily

For daily maintenance, do the following.

▪

Remove

any spills with disposable paper wipes or a damp cloth.

▪

Wipe

the outside of the oven with a damp cloth.

▪

Wipe

the oven gaskets with soap and water.

▪

Inspect

the oven gaskets for damage.

▪

Wipe

the front door glass.

▪

Check

the screen for cracking or peeling. Contact Technical Service if needed.

Weekly

For weekly maintenance, do the following.

▪

Clean

the entire oven.

Make sure

to use a non-abrasive nylon scrub pad.

▪

Do not spray the cleaner directly into the fan openings located in the rear of the

oven.

Monthly

For monthly maintenance, do the following.

▪

Inspect

and clean the air filters.

▪

Clean

out the drip tray line.

▪

Check

the supplied water filtration and change as needed.

▪

Check

for software updates.

▪

Check

lighting.

▪

De-scale

as needed.

Yearly

For yearly maintenance, do the following.

▪

Inspect

and test the humidity control.

▪

Inspect

and test the catalytic converter element.

▪

Inspect

the catalytic converter.

▪

Inspect

the air intake.

Check

the length of the tubing for debris clean out or

replace as needed.

Continued on next page



NOTE:

Must be performed by a qualified professional.

Содержание Converge CMC-H2H









































































































Результаты поиска

Содержание Converge CMC-H2H

Отзывы:

Похожие инструкции для Converge CMC-H2H

Бренды по названию

Популярные бренды

Alto-Shaam Converge CMC-H2H, Руководство оператора

Результаты поиска

Содержание Converge CMC-H2H

Отзывы:

Похожие инструкции для Converge CMC-H2H

Бренды по названию

Популярные бренды