background image

Page 2

Work Light II

Installation & Users Manual

Have a question regarding this manual?

WorkLight II Luminaire Installation & User’s Manual

© Altman Lighting 2021. All rights reserved.

Document Number: 

49-0416

Version as of: 

2021 July 02

Note: Information contained in this document may not be duplicated in full or in part by any person without prior written approval 

of Altman Lighting Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this 
document for all other purposes is specifically prohibited.

The material in this manual is for information purposes only and is subject to change without notice. Altman Lighting assumes no 

responsibility for any errors or omissions which may appear in this manual. For comments and suggestions regarding corrections 

and/or updates to this manual, please visit the Altman Lighting web site at www.altmanlighting.com or contact your nearest 

Altman 

Lighting Regional Manager

.

El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso. Altman Lighting no asume 

responsabilidad por errores o omisiones que puedan aparecer. Cualquier comentario, sugerencia o corrección con respecto a este 

manual, favor de dirijirlo a la oficina de Altman Lighting más cercana.

Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten. Altman Lighting uebernimmt 

keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch auftreten. FürBemerkungen und Verbesserungsvorschlaege 

oder Vorschlaege in Bezug auf Korrekturen und/oder Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der 

naechsten Altman Lighting Niederlassung aufzunehmen.

Should you have a suggestion or question regarding your Altman Lighting product, we would love to hear from you.   You can reach 

us at:

Altman Lighting 

1400 East 66th Ave. 

Denver, CO. 80229 

+1 (303) 500-7072 

www.altmanlighting.com

[email protected]

[email protected]

[email protected]

Preface

The document provides basic information on installation and operational instructions for a quali-

fied, trained installer. These instructions provide information for the following product:

 

WorkLight II

Included Accessories:

70-3259 - Color Frame with Diffusing Gel

SC-36-BK - Safety Cable

510 - Malleable Iron Pipe Clamp

PCL-PBG-12-5 (5’ 20A power con to Edison male)

Additional product information can be found on our web site at 

www.altmanlighting.com

 or by 

scanning the QR code to the right.

Altman Lighting continually engages in research related to product improvement. New materials, production methods and design 

refinements are introduced into existing products without notice as a routine expression of the philosophy. For this reason any current 

Altman Lighting product may differ in some respect from its published description, but will always equal or exceed the original design 

specifications unless otherwise noted.

Our Commitment

Содержание WORK LIGHT II












Отзывы: