Alpinespas SPA POOL, Руководство пользователя

Страница: 22 / 96

22
SPANET SV-SMART
(DUO, NOVA, MONT BLANC, YUKON, WHISTLER)
6. SPA USAGE GUIDE & TIPS
HEAT RANGE
10 - 41.0
O
C
SV-SMART
PUMP BUTTONS
Used to toggle filtration pump and/or any additional jet pump(s) on/off (if fitted).
SANITISE BUTTON
Press once to activate a 20min sanitisation and clean up cycle to refresh water quality after spa use. A second press will cancel the cycle if already running.
SLEEP TIMER
This LED will turn on to indicate when the controller is in sleep mode.
O
2
/UV
This LED will turn on to indicate that the Ozone or UV purifiers are operating.
HEATER
This LED will turn on when the heater or heat pump (if fitted) is operating
LIGHT ON/OFF
Used to toggle Spa lights on/off. Once activated, color selection and mode can be chosen with the up/down and OK buttons.
AUTOMATIC LED
This LED will turn on whenever the filtration pump is in automatic mode.
UP & DOWN BUTTON
Short single presses
toggle through
the three display modes: Water Temperature (W.TMP) Set temperature (S.TMP) and clock (TIME). Holding the button will force the controller to begin adjusting the set temperature and will increase or decrease the set temperature point. Also used for adjusting settings.
OK BUTTON
Press to confirm and save setting adjustments or to enter setting adjustment menus.
WATER TEMP/ TIME
Press to confirm and save setting adjustments or to enter setting adjustment menus.