Alpinespas SPA POOL, Руководство пользователя

Страница: 80 / 96

80
7. GETTING TO KNOW YOUR SPA POOL
LED LIGHTS
JETS
Activating the Lights - SVSMART PANELS
Activate the LED lights by pressing the ‘LIGHT’ button found on the top-side
control panel. Once pressed you can change the modes by using the using the ‘UP’,
‘DOWN’ and ‘OK’ buttons to select desired option.
Activating the Lights - SV3 PANELS
Activate the LED lights by pressing the ‘LIGHT’ button found on the top-side
control panel. Change the modes by pressing the ‘MODE‘ button, and then using
the ‘UP’, ‘DOWN’ and ‘OK’ buttons to select desired option.
LIGHT
LIGHT
Twist jet anti-clockwise to open flow. Twist jet clockwise to close flow.
SPANET JET
MODE
UP
UP
DOWN
DOWN
OK
OK
Activating the Jets
To turn on a jet pump - press the the jet button on the top-side control panel.
Adjusting Jet Water Flow
Each individual jet piece can have its water pressure adjusted by opening and
closing the flow. For max pressure, simply turn the jet face gently in an
anti-clockwise direction until you feel it stop. To reduce/stop the flow, turn in a
clockwise direction. When closed, a small amount of water trickling through the jet
piece is normal (this is protection for the pump in case all jets pieces are shut off).