RBMS Plus Installation and Opera
RBMS Plus Installation and Operation Manual
Alpha Technologies Ltd. | www.alpha.ca
PAGE 4
0370260-J0 Rev B
Important Information
1.1.
Revision History
Release
Date
Revision Description
Rev 1.2
Rev 1.1
11/10/2016
10/9/2015
Removed reference to PBT-PRG-USB, rewrote section on default IP address
Initial Release, Firmware Version XP 01.0b0, PIC 1.0
1.2.
Safety Notes
•
High currents and voltages may be present on the equipment terminals and on the interior of the
equipment. Make sure you understand and observe all appropriate safety codes and regulations. Follow
prudent electrical safety practices when installing or servicing the equipment. Installation, maintenance and
servicing of the equipment should only be performed by qualified, trained and authorized personnel.
•
Before installation, take measurements with a volt meter to ensure that no jar post in the system has lethal AC
or DC voltages relative to earth ground.
•
Except as explained in this manual, there are no user-serviceable parts inside the RBMS Plus. Opening the
equipment could expose you to dangerous voltages and void the product warranty. All product servicing
should be referred to factory-authorized personnel.
•
Use only interconnection cables supplied by or authorized by Alpha Technologies. Use of user-made
interconnection cable assemblies could result in damage to equipment and potential safety hazards, as well as
voiding of equipment warranties.
•
Do not exceed the voltage specifications of the product.
•
Make sure the equipment is grounded properly.
•
The equipment should be protected from liquids, moisture, explosives and corrosive vapors.
1.3.
Important Symbols
CAUTION!
The use of CAUTION indicates safety information intended to prevent damage and/or injury.
NOTE:
A NOTE provides additional information to help complete a specific task or procedure.
